Bostik Shower 280ml

APPLICATIONS: Excellent for sanitary-ware applications such as sealing around bathroom and kitchen fittings, baths, showers, sinks, and toilets where a transparent seal is required. ADHESION: Bostik Shower exhibits excellent primerless adhesion to many non-porous materials e.g. ceramics, glass, enamel, porcelain, coated wood, painted surfaces, canvas, stainless steel, aluminium, some rubbers and some plastics (epoxide, polyester, polyacrylate, polystyrene, formica, fiberglass, acrylics, polycarbonates and rigid PVC). LIMITATIONS: Not suitable for alkaline surfaces such as concrete, fibrous cement, asbestos, plaster and marble. Not suitable for some metals i.e. mild steel, lead, copper, tin, galvanized iron, brass or zinc as it may cause corrosion. CANNOT be over-painted. May become discoloured in contact with some organic elastomers, which tend to bleed oil or solvents into the silicone, e.g. EPDM, APTK, Neoprene and Bituminous surfaces. Not suitable for mirrors as it will de-silver the mirror backing, affecting the front appearance of the mirror. Not suitable for contact with natural stone i.e. marble, granite, quartzite as it may discolour the surfaces. Will not adhere to some plastics such as polyethylene, polypropylene and Teflon. NOT SUITABLE FOR FISH TANKS (contains a fungicide). Do not apply sealant when relative humidity is below 10% - cure rate will be affected. SAFETY INSTRUCTIONS: Bostik Shower is non-toxic, however it is advisable to wear gloves in order to avoid direct skin contact. In the event of skin or eye contact, rinse thoroughly and immediately with water. Seek medical assistance if irritation or discomfort persists. The product releases a pungent vinegar-like odour when uncured. Avoid breathing in vapours. Always work in a well ventilated area. Keep out of reach of children! Cured silicone rubber can be handled without any health risk.